Furniture hardware accessories selection notes:
1. the surface must be smooth, the surface plating layer does not fall off (no rust, burrs);
2. look at their packaging, good hardware in the manufacturer information, testing certificates, installation instructions, etc. will be very complete;
3. try to push the door, open the door, pull the drawer, to feel smooth, no noise;
4. pay attention to the material of the handle, pull it a little hard to see if there is any sign of looseness between the furniture and the furniture;
5. in addition to the flat and smooth hinge, the spring's reset performance is also good, you can open 95% and press hard on both sides to see if the spring is deformed;
6. Clearly ask the custom furniture operator, the brand of hardware accessories, whether it is made in China or imported, and written into the custom contract. Furniture accessories include a sofa, chair, bedroom furniture, and tables etc.
Furniture hardware maintenance:
1. For the cleaning of furniture hardware, wipe it with a damp cloth or a damp cloth with neutral detergent or detergent, and finally, wipe the water stains.
2. when there are serious stains or scratches on the surface, fireworks, and burns, you can use a fine sandpaper to lightly rub the surface, and then wipe with a scouring pad.
3. drawer rails and other mobile hardware accessories should be properly applied lubricants regularly, can reduce the friction of the hardware, and extend the service life.
4. to avoid rubbing furniture with water, you must regularly use special furniture cleaners or maintenance agents (such as Bi Lizhu, etc.), special furniture cleaners or maintenance agents should be sprayed on a clean cotton cloth to gently wipe off the dust. Do not scratch the surface of furniture hardware with sharp and hard objects to avoid contact with substances such as hydrochloric acid, salt, and salt.
5. Regularly check the firmness of hardware such as hinges, slide rails, eccentric parts, etc., and find that the looseness is fixed immediately.
6. Regularly clean the hardware fittings. After cleaning, apply some oil to the sliding or moving parts.
7. If you are unable to handle it yourself, please consult or repair the store.


No comments:
Post a Comment